Hi Robert,

The list includes all emulations. I will not upload , for now, all the artworks in one package.By uploading them one at a time you can examine them in more detail to correct mistakes in the lay (usually in the copy and paste) or in the drawing, as we have seen in this thread. And corrections are always welcome!

If you want some specific artwork I'll be happy to upload it.

Saludos,
Luis

Hi Franz

I want to use my own pieces and board in MessChess.

My board appears but my pieces don't.

In fact there aren't any pieces shown on my board but the Fidelity still works ok with Winboard & Arena without any pieces on my board.

Is there a simple way around this?

Here is a copy of my feagv2.lay file.

Regards
Bryan


?xml version="1.0"?
mamelayout version="2"

!-- define elements --

element name="Fidelity"
image file="Board.png" /
/element

element name="piece" defstate="0"
image file="BP.png" state="1"/
image file="BN.png" state="2"/
image file="BB.png" state="3"/
image file="BR.png" state="4"/
image file="BQ.png" state="5"/
image file="BK.png" state="6"/
image file="WP.png" state="7"/
image file="WN.png" state="8"/
image file="WB.png" state="9"/
image file="WR.png" state="10"/
image file="WQ.png" state="11"/
image file="WK.png" state="12"/

/element

Franz

For some strange reason one line of the lay file won't show, here it is.

image file="BB.png" state="3"/

Hi Bryan,
well, 2 points:

1) your pieces must be in the same ZIP-file (or folder) as your feagv2.lay,

2) and the numbers of your pieces are wrong: the white pieces (Wx.png) are 1-6 and the black pieces (Bx.png) are 7-12.

But the main problem is 1), point 2) would only exchange the black and white pieces.

Regards,
Franz

Hi Franz

Thanks for that but my pieces where in the same folder so it is a bit of a mystery why they are still not showing on my new board.

Regards
Bryan

If you send me the content of this folder, I could have a look at your layout ...

My artworks for Elite A/S (Original, Budapest and Glasgow) and Privat










Mods based on photos by Theo and José.


https://www.mediafire.com/file/rjhxb...te_as.zip/file

https://www.mediafire.com/file/6pnn8...rivat.zip/file

Unzip on artworks folder.

Saludos,
Luis

Hi Franz

If I try to change the board colours of the Leonardo in any of the 3 .lay files (sb board), the Leonardo v1.2 & v1.4 will change colour but the v1.0 won't which the SPARC must use. Why is this?

Regards
Bryan

Hi Bryan,
I don't understand!?
The Sparc is defined as sub-device of the Renaissance, not of Leonardo, so if you want different colors for the Sparc, you'll have to change the Renaissance artwork.
Of course you can also load the Sparc module in the Leonardo, but this is a bit tricky (only via TAB menu), but only in v1.2 and v1.4 - in v1.0 the Sparc module is not working.

Regards,
Franz

Hi Franz

Sorry, senior moment about the SPARC forget that.

But the question about the Leonardo is the same.
If I change the .lay code board colour then v1.2 & v1.4 changes colour but v1.0 doesn't?