|
||||||||||||
AW: Problem with portorose module
Hallo Larry,
die Batterie befindet sich im Displaymodul - das ist leicht zu öffnen. Schau mal hier und hier. Es ist eine CR2032 mit angeschweißtem Sockel. Ich habe gerade mein 16/32 Bit Display Modul vom Genius-Satz geöffnet; diese Batterie ist drinnen! Grüße, Michael If needed, I can translate my post into english!
__________________
Es ist besser, die Steine seines Gegners zu opfern. (S.G. Tartakower) Geändert von blaubaer (10.03.2011 um 06:23 Uhr) Grund: Ergänzung |
|
||||||||||||
Re: Problem with portorose module
Thank you Michael! I am surprised the battery is in the display module.
regards, Larry |
|
||||||||||||
![]() I don't know why, but I kept looking in the program module...
silly me ... Larry |
|
||||||||||||
Re: Problem with portorose module
Hello Michael, I am sorry to trouble you further. Yes the battery is easy
to find. But as you say it is welded into place. Could you tell me how to get it out? Do I have to apply heat? many thanks for your help so far.. regards, Larry |
|
||||||||||||
AW: Problem with portorose module
Hello Larry,
you need a soldering iron to desolder the battery base pins from the board; they are welded to the battery. The best is, to desolder the base pins and to replace the battery by a battery holder where you can easily mount and exchange the battery later on, when you have the same problem again. Regards, Michael
__________________
Es ist besser, die Steine seines Gegners zu opfern. (S.G. Tartakower) Geändert von blaubaer (11.03.2011 um 05:30 Uhr) |
|
||||||||||||
![]() Now it is fixed!....many thanks for your help, Michael. I did not know you
could purchase those batteries with the battery holder already attached. It was a simple job. Please have patience with me, I am seven years older than you... best regards, Larry |
|
||||||||||||
AW: Re: Problem with portorose module
Dear Larry,...time will come
![]() Regards, Michael
__________________
Es ist besser, die Steine seines Gegners zu opfern. (S.G. Tartakower) Geändert von blaubaer (11.03.2011 um 12:17 Uhr) |
![]() |
Themen-Optionen | |
Ansicht | |
|
|
![]() |
||||
Thema | Erstellt von | Forum | Antworten | Letzter Beitrag |
Hilfe: Problem mit Portorose 16bit Modul | Sven | Technische Fragen und Probleme / Tuning | 2 | 13.02.2011 13:01 |
Frage: Portorose mit Plastik ??? | chris | Die ganze Welt der Schachcomputer / World of chess computers | 6 | 04.11.2005 14:50 |