Hello Clive,
not sure I understand correctly:
Zitat von
Major Chaos
I have opted to use the CB-Emu GK2100 but I have increased the MHz to 32 via the options and I have set it to run Game in 90 rather than 30.
OK, at this stage you have a 32Mhz GK2100; that's about 3 times the original speed but the clock runs as well 3 times faster. Therefore you need to grant 90 minutes per game level, otherwise the device would target 10 actual minutes for its game.
Zitat von
Major Chaos
I have increased the speed by 300% to bring it in line with its opponents. I have tested this and it works well as long as you don't try and press the info button while it is running.
So we have a GK2100 at a simulated 96MHz!
Here I am a bit puzzled.
- If all devices are as well running at 300% emulator speed, it simply decreases the duration of the tournament; games should complete in about 10 minutes instead of 30. Perfectly fine, as long as all devices comply with this acceleration. The GK2100' performance is still the 32Mhz device' one. It is just "time compression" at your benefit. There is no "96Mhz" GK2100 involved. It still is a 32Mhz GK2100 playing in a fast forward view mode.
- If only the GK2100 benefits from 300% emulator speed, then you need to increase again the level setting, from 90 minutes to 270 per game, that's 4.5 hours, in order to achieve the moves a 96Mhz GK2100 would provide. Such a level isn't available.
Therefore to my understanding, only the first statement applies, and your games headers should state "Saitek GK2100 32Mhz", should'nt they?
All the best,
Eric