Zitat von
Lindwurm
Hi Graham,
your drivers work fine with the Revelation II (Fritz, Shredder and LucasChess are running on my Windows-PC). The LEDs are shown correctly.
The display shows the computer moves and the time alternating. While the computer is thinking, the time is on the display. When the computer moves, the move is on the display until you move the pieces on the board. Then the time is shown again.
But the time is not always 100% correctly synched. Sometimes the clock is a little bit delayed. For example if the time in the Software for white is 9:35, the display on the RevII shows 9:38. If white is on the move again, the clock synchs correct and jumps to 9:35 and is then running parallel to the PC til the next move. Sometimes perhaps a little bit confusing. For me not really a problem.
Thank you, Tobias! I'm not sure I'll be able to do anything about the time difference - it sounds like the sort of problem that will be hard to track down without a board to play with. But I'll look through my program and see if I can work out where the delay might be happening.
But it's good to know the driver works properly apart from that. Thanks again.