Schachcomputer.info Community

Zurück   Schachcomputer.info Community > Computerschach / Computer Chess: > Mess Emu & andere Emulationen / Mess Emu and other Emulations


Antwort
 
Themen-Optionen Ansicht

  #3291  
Alt 03.09.2019, 10:45
CC 7 CC 7 ist offline
Chess Machine
 
Registriert seit: 10.12.2004
Land:
Beiträge: 345
Abgegebene Danke: 0
Erhielt 316 Danke für 140 Beiträge
Aktivitäten Langlebigkeit
6/20 20/20
Heute Beiträge
0/3 ssssss345
AW: Re: Mess Emulator für diverse Schachcomputer ist fertig!

 Zitat von achimp Beitrag anzeigen
Hallo Hans-Jürgen,

der SS IV hat ein Toshiba- und der (neuere) Dynamic ein Mostek-ROM, der Inhalt ist aber identisch. Die ROM-Typen sind im Prinzip gleich, die haben wohl dort eingekauft, wo es gerade was gab.

Da hier beide ROMs gleich sind, denke ich nicht, daß bei einem Mostek im SS IV was anderes drin ist. Das mit der unterschiedlichen Spielstärke ist wohl eher ein Zufall bei wenigen Partien...

Gruß
Achim
Hi Achim !

Grundsätzlich hast Du völlig recht - zumeist liefern Mostek- und Toshiba-ROM des Super Sensor IV dieselben Züge und Lösezeiten.

Aber ich kann mich an einige Stellungen erinnern, in denen es minimale Abweichungen gab zwischen Super Sensor IV mit Mostek-ROM bzw. mit Toshiba-ROM.

Wenn sie beide absolut identisch sind - wären dann diese Unterschiede in den Lösungszeiten bei beiden folgenden Mattaufgaben möglich ?

F. Giegold, Süddeutsche Schachzeitung 1959
2#

 abcdefgh 
 8       WR    8 
 7  BB         7 
 6          6 
 5          5 
 4          4 
 3          3 
 2     WQ  WP     2 
 1  BK     WK    WR  1 
 abcdefgh 
 white to move
ChessDiag V1.01 (12-OCT-2002)

5R2/b7/8/8/8/8/3QP3/k3K2R w - - 0 1

In diesem Zweizüger findet weder Novag Super Sensor IV mit Mostek-ROM noch mit Toshiba-ROM auf Level 8 (stärkste Stufe) die richtige Lösung 1. Tf2!!, aber stattdessen ein Matt in 3 Zügen mit 1. Dc2!
Das Mostek-ROM braucht dafür 57 Sekunden, Toshiba-ROM benötigt nur 45 Sekunden.

F. Giegold , Kristall, 1962
2#

 abcdefgh 
 8          8 
 7          7 
 6    BN  BR  BB     6 
 5    BK       5 
 4      WQ     4 
 3    WK  BP      3 
 2       WN    2 
 1   WR        1 
 abcdefgh 
 white to move
ChessDiag V1.01 (12-OCT-2002)

8/8/2nrb3/2k5/4Q3/2Kp4/5N2/1R6 w - - 0 1

Diesen Zweizüger lösen beide korrekt mit dem überraschenden Damenopfer 1. Dd5+!!, die Mostek-Variante in 3 Minuten 29 Sekunden, wohingegen das Toshiba-ROM es in lediglich 2 Minuten und 30 Sekunden schafft.

Hmmm, 3:29 zu 2:30 - das liegt schon außerhlb einer gewissen Fehlertoleranz bei der Zeitmessung...sind also Mostek-ROM und Toshiba-ROM des Super Sensor IV doch nicht 100% identisch ?

Gibt es für diese unterschiedlichen Lösezeiten eine andere Erklärung ?

Ich hab mal die RAM-Door geöffnet, da stand auf dem mit einem orangenen Punkt versehenen ROM zu lesen:
Toshiba
TMM2364P
5611 1H

Bei meinem anderen Super Sensor IV handelt es sich um:
MOSTEK
MK37012N
MALAYSIA

Gruß
Hans-Jürgen

Mit Zitat antworten
  #3292  
Alt 03.09.2019, 14:41
hap hap ist offline
TASC R40
 
Registriert seit: 27.07.2019
Beiträge: 507
Abgegebene Danke: 183
Erhielt 1.642 Danke für 324 Beiträge
Aktivitäten Langlebigkeit
5/20 5/20
Heute Beiträge
0/3 ssssss507
Re: Mess Emulator für diverse Schachcomputer ist fertig!

Most likely, there are multiple revisions of Super Sensor IV.

Re: Morsch: One I know of that is emulated, is Mephisto Modena.
https://www.schach-computer.info/wik...ephisto_Modena
Berger sent me the romdump of CXG Dominator a while ago, it's an older version of the same program in Modena. The chesscomputer doesn't interest me at all so I don't have motivation to write the emulation for it :P
https://www.schach-computer.info/wik...hinx_Dominator

Re: Saitek modules: Indeed, the chessboard has its own CPU. Even the manual says that with a module inserted it becomes a dual-CPU system. However, that may be marketing blabla lies, and maybe the module takes over the complete bus and directly controls the chessboard (instead of communicating with the other CPU). I haven't looked into it thoroughly yet.
Mit Zitat antworten
  #3293  
Alt 03.09.2019, 14:57
Benutzerbild von achimp
achimp achimp ist offline
Schachcomputer Koryphäe
 
Registriert seit: 23.05.2008
Ort: Detmold
Alter: 66
Land:
Beiträge: 1.614
Abgegebene Danke: 884
Erhielt 771 Danke für 345 Beiträge
Aktivitäten Langlebigkeit
2/20 16/20
Heute Beiträge
0/3 sssss1614
AW: Re: Mess Emulator für diverse Schachcomputer ist fertig!

 Zitat von CC 7 Beitrag anzeigen
...
Gibt es für diese unterschiedlichen Lösezeiten eine andere Erklärung ?

Ich hab mal die RAM-Door geöffnet, da stand auf dem mit einem orangenen Punkt versehenen ROM zu lesen:
Toshiba
TMM2364P
5611 1H

Bei meinem anderen Super Sensor IV handelt es sich um:
MOSTEK
MK37012N
MALAYSIA
...
Hallo Hans-Jürgen,

die unterscheidlichen Zeiten können von der Geschwindigket der Roms/Eproms abhängen. Beim Abarbeiten muss die CPU ja ständig Code aus den Roms lesen und das dauert - später hat man oft die Roms ins RAM kopiert, um mehr Performance rauszuholen.

Das Toshiba-Rom hat eine Zugriffszeit von 250 ns, in meinem SS4 ist dasselbe drin.
Bei meinem Sensor Dynamic war auch ein Mostek drin, mit derselben Bezeichnung wie bei Dir. Diese ROMs haben teilweise Zugriffzeiten von 400 ns, sind also ein Drittel langsamer - das kann die Lösungszeiten schon erklären.

Gruß
Achim
Mit Zitat antworten
  #3294  
Alt 03.09.2019, 15:18
hap hap ist offline
TASC R40
 
Registriert seit: 27.07.2019
Beiträge: 507
Abgegebene Danke: 183
Erhielt 1.642 Danke für 324 Beiträge
Aktivitäten Langlebigkeit
5/20 5/20
Heute Beiträge
0/3 ssssss507
Re: Mess Emulator für diverse Schachcomputer ist fertig!

Ich glaube, 5611 1H und der Mostek ROM in Sensor Dynamic sind nicht identisch. Kein geschwindigheit problem.

Es gibt zwei Mask ROM versionen fur SS4:
- 5611 1H
- 5611 1I

5611 1I war identisch an Achim's Sensor Dynamic.
Mit Zitat antworten
  #3295  
Alt 03.09.2019, 15:21
Hartmut Hartmut ist offline
Lebende Foren Legende
 
Registriert seit: 01.04.2010
Ort: Nürnberg
Alter: 60
Land:
Beiträge: 2.173
Abgegebene Danke: 3.211
Erhielt 1.543 Danke für 897 Beiträge
Aktivitäten Langlebigkeit
3/20 14/20
Heute Beiträge
0/3 sssss2173
AW: Re: Mess Emulator für diverse Schachcomputer ist fertig!

 Zitat von hap Beitrag anzeigen
Re: Saitek modules: Indeed, the chessboard has its own CPU. Even the manual says that with a module inserted it becomes a dual-CPU system. However, that may be marketing blabla lies, and maybe the module takes over the complete bus and directly controls the chessboard (instead of communicating with the other CPU). I haven't looked into it thoroughly yet.
Hello hap

If you talk about Saitek Gallileo, Leonardo or Renaissance and the Modules for it, it is right. The chessboard with the main Program has a 6301Y CPU and offers the Levels a1-a8 and b1-b8, while the modules (like Maestro or Analyst for example) have a 65C02, the Brute Force Module a H8 and the Saitek Sparc has a Sparc-CPU.

I don't know if the modules take over the complete bus or directly controls the chessboard. I don't know if you can really call it a dual-CPU-System then, even when the additional module is in. By selecting the level, you define what programm you use and therefore what Processor is used. Levels beginning with a, b or c (e.g. Level c6) are the main Programm on the 6301Y, other Levels are the additional module with another CPU. Can you really call it a dual-CPU-System in this case only because the 6301Y controls the bus? I am not sure. Then also a 80386 with an additional 80387 would be a "Dual CPU-System"
__________________
Mein Profil beim ICCF (International Correspondence Chess Federation)
https://www.iccf.com/player?id=89948&tab=3
Mit Zitat antworten
  #3296  
Alt 03.09.2019, 15:28
hap hap ist offline
TASC R40
 
Registriert seit: 27.07.2019
Beiträge: 507
Abgegebene Danke: 183
Erhielt 1.642 Danke für 324 Beiträge
Aktivitäten Langlebigkeit
5/20 5/20
Heute Beiträge
0/3 ssssss507
Re: Mess Emulator für diverse Schachcomputer ist fertig!

I see, that sounds more and more like it actually communicates with the other CPU then.
Not for the chess engine calculations, but for button presses and such.
Mit Zitat antworten
  #3297  
Alt 03.09.2019, 16:19
Hartmut Hartmut ist offline
Lebende Foren Legende
 
Registriert seit: 01.04.2010
Ort: Nürnberg
Alter: 60
Land:
Beiträge: 2.173
Abgegebene Danke: 3.211
Erhielt 1.543 Danke für 897 Beiträge
Aktivitäten Langlebigkeit
3/20 14/20
Heute Beiträge
0/3 sssss2173
AW: Re: Mess Emulator für diverse Schachcomputer ist fertig!

 Zitat von hap Beitrag anzeigen
I see, that sounds more and more like it actually communicates with the other CPU then.
Not for the chess engine calculations, but for button presses and such.
Yes, I think so. It is a little bit like with the final chesscard and the C64. Sound, peripherals, etc are controlled by the C64 and its CPU while the Chessprogram on the card is controlled by its own CPU

The only difference is that in this case the chessboard also has an own chessprogram, which is also available with the module plugged in by selecting one of the levels beginning with a, b or c. What I don't know is, if the board position is still available if I change the level in the middle of a game from e.g. f3 (module level) to e.g. b2 (standard level) or vise versa. But maybe someone who has a Leonardo or Galileo can test that.
__________________
Mein Profil beim ICCF (International Correspondence Chess Federation)
https://www.iccf.com/player?id=89948&tab=3
Mit Zitat antworten
  #3298  
Alt 03.09.2019, 20:08
hap hap ist offline
TASC R40
 
Registriert seit: 27.07.2019
Beiträge: 507
Abgegebene Danke: 183
Erhielt 1.642 Danke für 324 Beiträge
Aktivitäten Langlebigkeit
5/20 5/20
Heute Beiträge
0/3 ssssss507
Re: Mess Emulator für diverse Schachcomputer ist fertig!

Hat jemand PCB bilder von SciSys Mark VI's sensorbrett?

Ideally, I'd need the ROM dump from it (yes, it appears it has its own ROM). It can't be emulated right now.
Mit Zitat antworten
  #3299  
Alt 03.09.2019, 20:44
Hartmut Hartmut ist offline
Lebende Foren Legende
 
Registriert seit: 01.04.2010
Ort: Nürnberg
Alter: 60
Land:
Beiträge: 2.173
Abgegebene Danke: 3.211
Erhielt 1.543 Danke für 897 Beiträge
Aktivitäten Langlebigkeit
3/20 14/20
Heute Beiträge
0/3 sssss2173
AW: Re: Mess Emulator für diverse Schachcomputer ist fertig!

 Zitat von hap Beitrag anzeigen
Hat jemand PCB bilder von SciSys Mark VI's sensorbrett?

Ideally, I'd need the ROM dump from it (yes, it appears it has its own ROM). It can't be emulated right now.
Puh... da einen Rom-Dump zu kriegen wird schwer werden. Soviele von diesen Brettern wurden meines Wissens nicht verkauft zumal sie dann in der Serienfertigung die Figurenerkennung des Prototypen nicht mehr hatten.

Ich nehm die Emu auch ohne Sensorbrett... lach
__________________
Mein Profil beim ICCF (International Correspondence Chess Federation)
https://www.iccf.com/player?id=89948&tab=3
Mit Zitat antworten
  #3300  
Alt 03.09.2019, 21:54
fhub fhub ist offline
Lebende Foren Legende
 
Registriert seit: 19.04.2010
Beiträge: 2.572
Abgegebene Danke: 431
Erhielt 5.654 Danke für 1.304 Beiträge
Aktivitäten Langlebigkeit
12/20 14/20
Heute Beiträge
1/3 sssss2572
AW: Re: Mess Emulator für diverse Schachcomputer ist fertig!

 Zitat von Hartmut Beitrag anzeigen
Ich nehm die Emu auch ohne Sensorbrett... lach
Also ich bin mir ziemlich sicher, daß man statt des echten Sensorbretts auch das normale MAME-'sensorboard' in der Emulation verwenden könnte, wenn das originale Brett-ROM nicht aufzutreiben ist.
Mit Zitat antworten
Antwort

Themen-Optionen
Ansicht

Forumregeln
Du bist nicht berechtigt, neue Themen zu erstellen.
Du bist nicht berechtigt, auf Beiträge zu antworten.
Du bist nicht berechtigt, Anhänge hochzuladen.
Du bist nicht berechtigt, deine Beiträge zu bearbeiten.

BB code ist An
Smileys sind An.
[IMG] Code ist An.
HTML-Code ist An.

Gehe zu

Ähnliche Themen
Thema Erstellt von Forum Antworten Letzter Beitrag
Info: Mephisto Emulator für den Mac fertig RolandLangfeld Die ganze Welt der Schachcomputer / World of chess computers 3 09.09.2007 22:56


Alle Zeitangaben in WEZ +1. Es ist jetzt 07:26 Uhr.



Powered by vBulletin (Deutsch)
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Schachcomputer.info