Schachcomputer.info Community

Zurück   Schachcomputer.info Community > Schachcomputer / Chess Computer: > Technische Fragen und Probleme / Tuning


Antwort
 
Themen-Optionen Ansicht

  #1  
Alt 03.07.2020, 12:29
Tibono Tibono ist offline
TASC R30
 
Registriert seit: 22.05.2018
Ort: Frankreich
Alter: 62
Land:
Beiträge: 457
Abgegebene Danke: 2.141
Erhielt 1.106 Danke für 361 Beiträge
Aktivitäten Langlebigkeit
7/20 6/20
Heute Beiträge
1/3 ssssss457
Frage Saitek Kasparov Blitz - reed switch question

Hello,

I recently bought a Saitek Blitz, it happens to have a non-blocking defect: the function selection wheel (the one controling the digital display window) does not detect the rotation direction.

According to the user manual, this is a concern only in two situations:
- in game mode, to replay forth & back the moves that are stored in memory (but moving the pieces on the board is a working substitute)
- in set-up mode: one direction to change piece, the other way to display the squares that are occupied by the selected piece. In this context, my Blitz can only show the king's position, no way to switch to other pieces. As a consequence, I cannot verify current position... To set-up a board position, I have a workaround: from game start position, I can remove unused pieces and move the other ones to their target square.

Now, let's get to the question I have: turning the function selection wheel, I can hear a light click when the chosen function changes; exactly the same sound as a reed switch does when a piece activates it in a Mephisto Modular board. I opened the Blitz and could check the wheel does include four magnets, arranged with 90° steps. This confims a reed swith must be hidden under the wheel - I couldn't check as dismounting further on seemed a but tricky. Now, how is the Blitz supposed to be aware of the direction the magnet is moving in? My guess is there are two reed switches, and the first one triggered identifies the direction. If so, one failing switch would result in the issue I have: the function can still change, but only one way.

Can anybody owning a Blitz confirm? I think a very simple and non-intrusive test consists in turning the wheel, device powered off (to hear the clicks rather than any beep), while listening, and if two clicks are heard close to each other when turning the wheel, each quarter of a revolution, this would be an evidence two reed switchs are indeed used (and one is dead in my device...).

Thanks & regards,
Eric
Mit Zitat antworten
  #2  
Alt 03.07.2020, 20:21
Benutzerbild von berger
berger berger ist offline
Mephisto MM 4 Turbo Kit
 
Registriert seit: 27.05.2013
Ort: Barcelona (Catalonia)
Beiträge: 168
Abgegebene Danke: 372
Erhielt 462 Danke für 119 Beiträge
Aktivitäten Langlebigkeit
5/20 11/20
Heute Beiträge
1/3 ssssss168
Re: Saitek Kasparov Blitz - reed switch question

Hello Tibono,

There are indeed reed switches, but fortunately they are on the top of the PCB. It is not necessary to disassemble the PCB to replace them, as you can cut the pins and solder new ones.

Also attached is a photo of the wheel with the magnets. I once found one of these magnets detached.

Best,
Gerardo
Miniaturansicht angehängter Grafiken
Klicke auf die Grafik für eine größere Ansicht

Name:	Blitz01.jpg
Hits:	175
Größe:	103,2 KB
ID:	4566   Klicke auf die Grafik für eine größere Ansicht

Name:	Blitz02.jpg
Hits:	133
Größe:	85,6 KB
ID:	4567  
Mit Zitat antworten
Folgende 2 Benutzer sagen Danke zu berger für den nützlichen Beitrag:
Drahti (07.07.2020), Tibono (04.07.2020)
  #3  
Alt 04.07.2020, 08:20
Tibono Tibono ist offline
TASC R30
 
Registriert seit: 22.05.2018
Ort: Frankreich
Alter: 62
Land:
Beiträge: 457
Abgegebene Danke: 2.141
Erhielt 1.106 Danke für 361 Beiträge
Aktivitäten Langlebigkeit
7/20 6/20
Heute Beiträge
1/3 ssssss457
AW: Saitek Kasparov Blitz - reed switch question

Hello Gerardo,

nice pictures, very helpful and much appreciated answer!
A huge thank.
Eric
Mit Zitat antworten
  #4  
Alt 09.07.2020, 14:54
Tibono Tibono ist offline
TASC R30
 
Registriert seit: 22.05.2018
Ort: Frankreich
Alter: 62
Land:
Beiträge: 457
Abgegebene Danke: 2.141
Erhielt 1.106 Danke für 361 Beiträge
Aktivitäten Langlebigkeit
7/20 6/20
Heute Beiträge
1/3 ssssss457
AW: Re: Saitek Kasparov Blitz - reed switch question

 Zitat von berger Beitrag anzeigen
...you can cut the pins and solder new ones.
And this is exactly what I did... 2.78€ per switch, I ordered two of them to have a spare (should I break one) but soldering the first one succeeded. My Blitz is now completely OK!

I am so happy! Funny enough, buying a Hall-sensor device and having to deal with a faulty reed switch...

Now I can much more easily setup a position; I think I will go thru BT-2450 test!

Cheers,
Eric
Mit Zitat antworten
  #5  
Alt 09.07.2020, 16:38
Lucky Lucky ist offline
Mephisto Wundermaschine
 
Registriert seit: 23.09.2011
Beiträge: 489
Abgegebene Danke: 461
Erhielt 357 Danke für 226 Beiträge
Aktivitäten Langlebigkeit
6/20 13/20
Heute Beiträge
1/3 ssssss489
AW: Saitek Kasparov Blitz - reed switch question

Amuse-toi bien!
Mit Zitat antworten
Folgender Benutzer sagt Danke zu Lucky für den nützlichen Beitrag:
Tibono (09.07.2020)
Antwort

Themen-Optionen
Ansicht

Forumregeln
Du bist nicht berechtigt, neue Themen zu erstellen.
Du bist nicht berechtigt, auf Beiträge zu antworten.
Du bist nicht berechtigt, Anhänge hochzuladen.
Du bist nicht berechtigt, deine Beiträge zu bearbeiten.

BB code ist An
Smileys sind An.
[IMG] Code ist An.
HTML-Code ist An.

Gehe zu

Ähnliche Themen
Thema Erstellt von Forum Antworten Letzter Beitrag
Hilfe: Kasparov Blitz Fehlermeldung Mapi Technische Fragen und Probleme / Tuning 18 24.02.2017 16:35
Partie: Krypton Challenge - Kasparov Blitz ferribaci Partien und Turniere / Games and Tournaments 3 27.04.2016 23:23
Hilfe: BDA Kasparov Blitz alexhr Die ganze Welt der Schachcomputer / World of chess computers 6 26.11.2013 11:44


Alle Zeitangaben in WEZ +1. Es ist jetzt 11:16 Uhr.



Powered by vBulletin (Deutsch)
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Schachcomputer.info