Schachcomputer.info Community
  #1  
Alt 20.06.2010, 08:29
R.Teichmann R.Teichmann ist offline
Mark V
 
Registriert seit: 10.06.2010
Beiträge: 17
Abgegebene Danke: 1
Erhielt 0 Danke für 0 Beiträge
Aktivitäten Langlebigkeit
0/20 14/20
Heute Beiträge
0/3 sssssss17
Analyst LCD

Hallo,

Ich habe ein Problem mit meiner 'ANALYST C' LCD. Es wird Positionsinformation richtig nicht zeigen. Es zeigt nur die Zeit. Wenn ich 'Funktion' dann 'Info' drücke, um Einschätzung zu zeigen, höre ich Fehlersignalton.'Analysis' und 'Set-up', sind OK. Irgendwelche Ideen?

Dank
Mit Zitat antworten
  #2  
Alt 20.06.2010, 12:14
user204
Gast
 
Beiträge: n/a
Aktivitäten Langlebigkeit
0/20 0/20
Heute Beiträge
sssssssss
AW: Analyst LCD

Moin,

verstehe nicht wirklich dein Problem
Modul mal raus gezogen,Netzteil mal gewechselt?
Ansonsten mal Arno Kreutzberg kontaktieren (Arno.Kreuzberg@freenet.de)!!

Gruß,Stefan

Geändert von user204 (20.06.2010 um 12:22 Uhr)
Mit Zitat antworten
  #3  
Alt 21.06.2010, 10:46
R.Teichmann R.Teichmann ist offline
Mark V
 
Registriert seit: 10.06.2010
Beiträge: 17
Abgegebene Danke: 1
Erhielt 0 Danke für 0 Beiträge
Aktivitäten Langlebigkeit
0/20 14/20
Heute Beiträge
0/3 sssssss17
Re: AW: Analyst LCD

 Zitat von marste Beitrag anzeigen
Moin,

verstehe nicht wirklich dein Problem
Modul mal raus gezogen,Netzteil mal gewechselt?
Ansonsten mal Arno Kreutzberg kontaktieren (Arno.Kreuzberg@freenet.de)!!

Gruß,Stefan
Schade mein Deutsch ist nicht besonders gut.

LCD works OK. But won't display, search-depth
position evaluation,
best move. Only time clocks will display. Maybe software glitch.
Mit Zitat antworten
  #4  
Alt 21.06.2010, 11:06
Benutzerbild von Mythbuster
Mythbuster Mythbuster ist offline
Forengrinch
 
Registriert seit: 06.04.2008
Ort: UNESCO Welterbe
Land:
Beiträge: 6.906
Bilder: 257
Abgegebene Danke: 1.463
Erhielt 4.614 Danke für 1.522 Beiträge
Member Photo Albums
Aktivitäten Langlebigkeit
7/20 16/20
Heute Beiträge
0/3 sssss6906
AW: Analyst LCD

Hi,
I think also that it is a software failure. Because the LCD is "dumb" ... is shows only the things which are send from the main unit. If the display had a problem it would show nothing at all ...

So perhaps you should try to replace the EPROM with a new one.

Kind Regards,
Sascha
__________________
This post may not be reproduced without prior written permission.
Copyright (c) 1967-2024. All rights reserved to make me feel special. :-)
Mit Zitat antworten
  #5  
Alt 21.06.2010, 15:15
R.Teichmann R.Teichmann ist offline
Mark V
 
Registriert seit: 10.06.2010
Beiträge: 17
Abgegebene Danke: 1
Erhielt 0 Danke für 0 Beiträge
Aktivitäten Langlebigkeit
0/20 14/20
Heute Beiträge
0/3 sssssss17
Re: Analyst LCD

Thanks. I'll give that a try.

Danke
Mit Zitat antworten
  #6  
Alt 21.06.2010, 15:18
Benutzerbild von Mythbuster
Mythbuster Mythbuster ist offline
Forengrinch
 
Registriert seit: 06.04.2008
Ort: UNESCO Welterbe
Land:
Beiträge: 6.906
Bilder: 257
Abgegebene Danke: 1.463
Erhielt 4.614 Danke für 1.522 Beiträge
Member Photo Albums
Aktivitäten Langlebigkeit
7/20 16/20
Heute Beiträge
0/3 sssss6906
AW: Re: Analyst LCD

 Zitat von R.Teichmann Beitrag anzeigen
Thanks. I'll give that a try.

Danke
No problem. In my opinion should that solve your problem.
It would be nice to keep us informed.

Regards,
Sascha
__________________
This post may not be reproduced without prior written permission.
Copyright (c) 1967-2024. All rights reserved to make me feel special. :-)
Mit Zitat antworten
  #7  
Alt 21.06.2010, 17:05
Benutzerbild von mclane
mclane mclane ist offline
Lebende Foren Legende
 
Registriert seit: 16.04.2005
Ort: Lünen
Alter: 57
Land:
Beiträge: 3.807
Abgegebene Danke: 2.097
Erhielt 3.949 Danke für 1.471 Beiträge
Aktivitäten Langlebigkeit
14/20 19/20
Heute Beiträge
2/3 sssss3807
AW: Analyst LCD

IMO this sounds like a miscommunication between
BOARD and MODULE.

it is the BOARD who controls all features, the board is kind of GUI like Arena.
the module is like an UCI engine.


Which board you use it ?
do you have another board or know another person who is willing to allow you to test your module in his board ?
__________________
Die ganze Welt des Computerschachs
Mit Zitat antworten
  #8  
Alt 21.06.2010, 17:24
Benutzerbild von Mythbuster
Mythbuster Mythbuster ist offline
Forengrinch
 
Registriert seit: 06.04.2008
Ort: UNESCO Welterbe
Land:
Beiträge: 6.906
Bilder: 257
Abgegebene Danke: 1.463
Erhielt 4.614 Danke für 1.522 Beiträge
Member Photo Albums
Aktivitäten Langlebigkeit
7/20 16/20
Heute Beiträge
0/3 sssss6906
AW: Analyst LCD

Hi Thorsten,
I don't think so. Because if you have a contact problem there should be no function in the display at all ... Maybe if one pin has a contact problem I could imagine that some dots in the matrix will not work ...

But: Some information are displayed correct and some not? I don't think that this is a hardware problem ... but nevertheless ... you never know ...

So I think the user should try both: Try a different EPROM and testting the module in a second board.

Regards,
Sascha
__________________
This post may not be reproduced without prior written permission.
Copyright (c) 1967-2024. All rights reserved to make me feel special. :-)
Mit Zitat antworten
  #9  
Alt 29.06.2010, 12:16
R.Teichmann R.Teichmann ist offline
Mark V
 
Registriert seit: 10.06.2010
Beiträge: 17
Abgegebene Danke: 1
Erhielt 0 Danke für 0 Beiträge
Aktivitäten Langlebigkeit
0/20 14/20
Heute Beiträge
0/3 sssssss17
AW: Analyst LCD

 Zitat von mclane Beitrag anzeigen
IMO this sounds like a miscommunication between
BOARD and MODULE.

it is the BOARD who controls all features, the board is kind of GUI like Arena.
the module is like an UCI engine.


Which board you use it ?
do you have another board or know another person who is willing to allow you to test your module in his board ?
I have the Leonardo board. The board lights will show main line, depth and evaluation however it just won't come up on the LCD display. The manual suggests "function" then "info" keys but I just get an error noise. I will have a new EPROM in a few days but I don't really have another board to try. Not such a big issue just thought maybe this was a common defect or I'm misunderstanding the user guide.
Mit Zitat antworten
Antwort

Themen-Optionen
Ansicht

Forumregeln
Du bist nicht berechtigt, neue Themen zu erstellen.
Du bist nicht berechtigt, auf Beiträge zu antworten.
Du bist nicht berechtigt, Anhänge hochzuladen.
Du bist nicht berechtigt, deine Beiträge zu bearbeiten.

BB code ist An
Smileys sind An.
[IMG] Code ist An.
HTML-Code ist An.

Gehe zu

Ähnliche Themen
Thema Erstellt von Forum Antworten Letzter Beitrag
Frage: Saitek Analyst Module ? Mogoe Die ganze Welt der Schachcomputer / World of chess computers 4 30.05.2005 17:51


Alle Zeitangaben in WEZ +1. Es ist jetzt 12:38 Uhr.



Powered by vBulletin (Deutsch)
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Schachcomputer.info