Einzelnen Beitrag anzeigen
  #1  
Alt 17.06.2019, 12:03
Benutzerbild von RudolfE
RudolfE RudolfE ist offline
MACH III
 
Registriert seit: 25.08.2013
Beiträge: 125
Abgegebene Danke: 120
Erhielt 25 Danke für 19 Beiträge
Aktivitäten Langlebigkeit
5/20 11/20
Heute Beiträge
0/3 ssssss125
Ipaq HP 214 (Pocket Grandmaster) und DGT Smartboard?

Hat jemand schon folgendes versucht?

Connection to the USB-DGT-board

How to connect an USB-DGT Board to PocketGrandmaster. We thank David Dunnett and Gary Morton, who provided the following descriptions of their setups. Please note that we can't guarantee that these setups also works on your Pocket PC, so use these descriptions at your own risk. Before starting, make sure you have PocketGrandmaster 3.0.1 (or newer) installed. The setup David Dunnett has is:
- HP iPAQ 214
- HP FB112AA#AC3 iPAQ 200 Series Enhanced Sync/Charge Cable
- USB micro cable supplied with the DGT board
- The FTDI usb driver from http://www.ftdichip.com
Procedure:
- Copy the file ftdi_ser.dll(no other files needed) from the FTDI usb driver into the windows directory of the iPAQ
- Ensure the HP iPAQ 214 is turned on
- Connect the HP iPAQ 214 to the DGT board
- A window will come up on the HP iPAQ 214 screen asking for a driver for the new device, type in ftdi_ser.dll. The window should disappear

Übersetzt: Die unten angeführte Datei in den Windows Ordner des Ipaq kopieren. Den Pocket Grandmaster mit dem DGT-Brett verbinden. Der Ipaq muss natürlich eingeschaltet sein. Dann muss ein Fenster aufgehen, wegen der Verbindung! Auf die ftdi_ser.dll Datei tippen. Das Fenster verschwindet wieder. Fertig!

Hab leider kein DGT Brett, sonst würde ich es natürlich selbst versuchen.
Sollte es jemand schaffen, dann hab ich schon morgen ein DGT Brett.

Hier der Downloadlink der Datei:
http://www.mediafire.com/file/2431wo...i_ser.rar/file

lg (Ich bitte um positive Rückmeldungen )

Geändert von RudolfE (17.06.2019 um 18:23 Uhr)
Mit Zitat antworten